Netopia Firmware 4000-Series Manual de usuario descargar pdf (Pagina 175)

IP Setup 6-23

■ From the NetBIOS Type pop-up menu, select the type of NetBIOS used on your network.

■ To ser ve DHCP clients with the NetBIOS scope, select Serve NetBIOS Scope and toggle it to Yes.

Select NetBIOS Scope and enter the scope.

■ To ser ve DHCP clients with the IP address of a NetBIOS name server, select Serve NetBIOS Name Server

and toggle it to Yes .

Select NetBIOS Name Server IP Addr and enter the IP address for the NetBIOS name server.

You are now ﬁnished setting up DHCP NetBIOS Options. To return to the IP Address Serving screen, press

Escape.

■ To enable BootP’s address serving capability, select Serve BOOTP Clients and toggle to Ye s .

Note: Addresses assigned through BootP are permanently allocated from the IP Address Serving pool until

you release them. To release these addresses, navigate back to the Main Menu, then Statistics & Logs,

Served IP Addresses, and Lease Management.

DHCP NetBIOS Options

+--------+

Serve NetBIOS Type: +--------+

NetBIOS Type... | Type B |

| Type P |

Serve NetBIOS Scope: | Type M |

NetBIOS Scope: | Type H |

+--------+

Serve NetBIOS Name Server: No

NetBIOS Name Server IP Addr: 0.0.0.0

Local network Broadcast nodes

Main

Statistics

Served IP

& Logs

Addresses

Lease Management

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 313 314

Sin comentarios

Netopia Firmware 4000-Series Manual de usuario Pagina 175