Netopia Firmware 4000-Series Manual de usuario Pagina 126

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 314
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 125
4-24 Firmware User Guide
In the Display/Change Filter Set screen select Display/Change Output Filter.
Display/Change Output Filter screen
Select Output Filter 1 and press Return. In the Change Output Filter 1 screen, set the Protocol Type and
Destination Port information as shown below.
Select Output Filter 2 and press Return. In the Change Output Filter 2 screen, set the Protocol Type to allow
GRE as shown below.
+-#----Source IP Addr----Dest IP Addr------Proto-Src.Port-D.Port--On?-Fwd-+
+-------------------------------------------------------------------------+
| 1 0.0.0.0 0.0.0.0 TCP NC =1723 Yes Yes |
| 2 0.0.0.0 0.0.0.0 GRE -- -- Yes Yes |
| |
+-------------------------------------------------------------------------+
Change Output Filter 1
Enabled: Yes
Forward: Yes
Source IP Address: 0.0.0.0
Source IP Address Mask: 0.0.0.0
Dest. IP Address: 0.0.0.0
Dest. IP Address Mask: 0.0.0.0
Protocol Type: UDP
Source Port Compare... No Compare
Source Port ID: 0
Dest. Port Compare... No Compare
Dest. Port ID: 5150
Change Output Filter 2
Enabled: Yes
Forward: Yes
Source IP Address: 0.0.0.0
Source IP Address Mask: 0.0.0.0
Dest. IP Address: 0.0.0.0
Dest. IP Address Mask: 0.0.0.0
Protocol Type: GRE
Vista de pagina 125
1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 313 314

Comentarios a estos manuales

Sin comentarios