Netopia CLI 874 Manual de usuario descargar pdf (Pagina 142)

2-130 Command Line Interface Commands Reference

Xauth conﬁguration commands

Note: The commands in this section are supported beginning with Firmware Version 8.4.2.

ike phase1 { name | index } xauth mode { disabled | client | concentrator }

show ike phase1 { name | index } xauth mode

These commands allow you to enable, disable, or show the status of the Xauth extensions to IPsec, as client or

concentrator when ike phase1 mode is set to aggressive. Default is disabled.

ike phase1 { name | index } xauth database { local | radius }

show ike phase1 { name | index } xauth database

These commands allow you to specify the authentication database type to be used for Xauth user

authentication when xauth mode is set to concentrator. If you specify radius, the Router will use the glo-

bally-conﬁgured RADIUS server database. (IF xauth mode is set to client, it can only send the locally-conﬁgured

username/password.) See “RADIUS Authentication Conﬁguration Commands” on page 2-119.

ike phase1 { name | index } xauth username name

show ike phase1 { name | index } xauth username

These commands allow you to set or show the the Xauth username speciﬁed by name.

ike phase1 { name | index } xauth password password

show ike phase1 { name | index } xauth password

These commands allow you to set or show the the Xauth password speciﬁed by password.

Xauth Conﬁguration Commands