Netopia Router PN Series Manual de usuario Pagina 221

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 301
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 220
Utilities and Tests 10-17
3. Select CANCEL to exit without uploading the file, or select
CONTINUE to upload the file.
If you choose CONTINUE, you will have ten seconds to use your
terminal emulation software to initiate an XMODEM transfer of
the configuration file. If you fail to initiate the transfer in that
time, the dialog box will disappear and the terminal emulation
software will inform you of the transfer’s failure. You can then
try again.
Transferring configuration and firmware files with TFTP
Trivial File Transfer Protocol (TFTP) is a method of transferring data
over an IP network. TFTP is a client-server application, with the
Router as the client. To use the Router as a TFTP client, a TFTP
server must be available.
To use TFTP, select Trivial File Transfer Protocol (TFTP) in the
Advanced Configuration screen and press Return to go to the Trivial
File Transfer Protocol (TFTP) screen.
Trivial File Transfer Protocol (TFTP)
Trivial File Transfer Protocol (TFTP)
TFTP Server Name:
Firmware File Name:
GET FIRMWARE FROM SERVER...
Config File Name:
GET CONFIG FROM SERVER...
SEND CONFIG TO SERVER...
TFTP Transfer State -- Idle
TFTP Current Transfer Bytes -- 0
Vista de pagina 220
1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 300 301

Comentarios a estos manuales

Sin comentarios