Netopia 4752 Manual de usuario descargar pdf (Pagina 140)

11-30 Administration Guide

Select Show/Change Public Range, then Easy-PAT Range, and press Return. Enter the value your ISP assigned

for your public address (206.1.1.6, in this example). Toggle Type to pat. Your public address is then mapped to

the remaining private IP addresses using PAT. (If you were not using the Easy-PAT Range and Easy-PAT List that

are created by default by using Easy Setup, you would have to deﬁne a public range and map list. For the

purpose of this example you can just alter this range and list.)

Select CHANGE NAT PUBLIC RANGE and press Return. This returns you to the Network Address Translation

screen.

Select Add Public Range and press Return. Type a name for this static range, as shown below. Enter the ﬁrst

and last public addresses your ISP assigned in their respective ﬁelds as shown. The ﬁrst ﬁve public IP

addresses (206.1.1.1 - 206.1.1.5, in this example) are statically mapped to the ﬁrst ﬁve corresponding private

IP addresses (192.168.1.1 - 192.168.1.5).

Change NAT Public Range

Range Name: Easy-PAT Range

Type... pat

Public Address: 206.1.1.6

First Public Port: 49152

Last Public Port: 65535

CHANGE NAT PUBLIC RANGE CANCEL

Add NAT Public Range

Range Name: Static Range

Type... static

First Public Address: 206.1.1.1

Last Public Address: 206.1.1.5

ADD NAT PUBLIC RANGE CANCEL

Return/Enter to commit changes.

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 283 284

Sin comentarios

Netopia 4752 Manual de usuario Pagina 140